Introduction

The days of governments owning all the equipment needed to satisfy their ICT needs are over. Governments now buy much of their ICT capacity as services not as hardware. E-mail is often a cloud-based service purchased from a vendor. Telephone service is now typically provided via the internet (voice over internet protocol or VOIP) or through cellular services. The recommendations in this section can also be applied to VOIP telephone services.

In looking across the whole environmental life cycle of ICT services, the biggest GHG hotspot is energy used in provision of the services, so that’s where governments should focus their attention. Energy use and GHG emissions of a server center are directly related to:

  • Efficiency of the server center itself, mostly for temperature control
  • Efficiency of the ICT hardware used in the center, and,
  • Energy sources powering the data centers. So centers powered by coal will have a different GHG footprint than those using solar photovoltaic arrays.

 

In this context, the procurement goal is to select services which are provided with the lowest GHG footprint measured in GHG emissions per unit of data. The most effective approach to reduce the GHGs from these services is to use vendor questionnaires, standards, and certifications centered on energy use and electricity sources during the RFP process.

There are a variety of ICT standards and metrics that organizations can request in RFPs to help identify and compare GHG emissions associated with procured ICT services. These range broadly in the scope of considerations, from full environmental life cycle standards that document “cradle to grave” impacts to pledges that companies will take energy-saving steps in ICT management. We provide a brief description of these approaches here.

Telecom services, while generally not the focus of this ICT procurement guidance, do fit into this discussion of ICT services. Telecom services that use data centers to transmit communications, such as webinar and video-conference services, and VOIP, are similar to other ICT services. The energy and GHG metrics below will be relevant for both ICT and data telecom. Procurement of traditional copper wire “land line” systems wouldn’t fit into this approach as well.

HOW TO IMPLEMENT

Organizations can request a variety of information from in an ICT service request for proposals (RFPs). These options are grouped into three approaches in order of priority for reduction carbon footprint of procured services: service-based, operations efficiency-based, and facility/corporate certifications-based. Each approach includes specific data metrics for vendors to provide, listed in order of preference.For each metric, the vendor should list the methodology, standard, and/or program they followed.

Purchasers can maximize the GHG reduction/environmental performance by allocating a greater proportion of scoring points to or requiring any of the suggested metrics. However, because many of these metrics are new, we suggest giving points for both the provision of the data requested, and for relative performance (that is, vendor or services that have higher efficiency or lower GHG per unit should receive some preference in the evaluation process), rather than making them a requirement. Each of the recommended metrics and standards has the advantage of capturing overall energy use in some way. Many of them will capture relative GHG emissions as well. Government purchasers requesting any of these metrics shouldn’t have to evaluate specific hardware at a vendor’s data centers because the impact of the hardware selection will be incorporated in the larger metric.

RECOMMENDED METRICS TO REQUEST (in preferred order)

Service-based Approach: Request vendors provide:

  1. Full GHG Life Cycle Assessment of ICT service provided (CO2e per service provided), or
  2. GHG Intensity of ICT Operations by service provided (CO2e per unit of service, such as Terabytes of data processed), or
  3. Energy Intensity of ICT Operations by service provided (kWh per unit of service) and identify energy source and/or operations’ electricity grid

Operations Efficiency-based Approach: Request vendors provide the following for the data center(s) that provide the services procured by the organization

  1. Carbon Usage Effectiveness of data center operations, or
  2. Power Usage Effectiveness of data center operations

Certification-based Approach: Request vendors identify whether they have:

  1. ENERGY STAR certification for the data center providing the ICT service procured by the State
  2. Taken ENERGY STAR’s Low Carbon ICT Campaign pledge.
  3. LEEDv4 certification for newly constructed data centers or LEEDv4 O+M certification for already built, whole building data centers.

SECOND CHOICE – PRACTICES IMPLEMENTED

If vendors cannot respond with any of the preferred metrics above, the next step would be to ask them to report on any of the EPA’s recommended steps they may have implemented at their data center facilities.

Top 12 Ways to Decrease the Energy Consumption of Your Data Center

ICT Opportunities

 

  1. Server Virtualization
  2. Decommissioning of Unused Servers
  3. Consolidation of Lightly Utilized Servers (metric: Server utilization factor)
  4. Better Management of Data Storage
  5. Purchasing More Energy-Efficient Servers, UPSs, and PDUs

Airflow Management Strategies

 

  1. Hot Aisle/Cold Aisle Layout
  2. Containment/Enclosures
  3. Variable Speed Fan Drives
  4. Properly Deployed Airflow Management Devices

HVAC Adjustments

 

  1. Server Inlet Temperature and Humidity Adjustments
  2. Air-Side Economizer
  3. Water-Side Economizer

Strategy 3 Considerations

  1. Key players to involve – Besides the purchasers who specialize in ICT procurement, it is essential to form a team of ICT managers from your organization. If at all possible, have a vendor meeting prior to issuing the RFP to get input from potential vendors.
  2. Staff training: Basic understanding of environmental life cycle assessment will be helpful but not essential. Staff will not need to know the math, or detail, of conducting one. However, it will be helpful for them to understand how to compare LCA results. For example, the concepts of “functional units” and “system boundaries” are basic to knowing what’s been included in the analysis and what has not, to ensure an “apples to apples” comparison. The American Center for Life Cycle Analysis can be a helpful source of training resources http://www.lcacenter.org/.
  3. Pair your efforts to reduce GHG footprint of services with internal conservation efforts to reduce unnecessary use of services where possible. For example, encourage employees to clean-out e-mail periodically.
  4. Address potential barriers / myths. For government, ICT can be one of an organization’s biggest carbon footprint procurement categories because information and communication is such a large part of what government does. Some may erroneously conclude that ICT should then be reduced, in order to lower overall emissions, and more paper should be used because paper doesn’t use electricity in its use phase. This is faulty logic. In most cases, using digital resources is environmentally preferable to creation of paper documents and publications. Use of ICT to decrease use of paper, decrease travel or improve logistics will result in a net carbon footprint reduction.

Vendor Reports and Measuring Results

Once you have a contract in place where a service- or operations-based metric is provided, this can become the baseline.  If possible, ensure that periodic usage reports are required in the contract.  Reports should include service usage, dollars spent, and the carbon or GHG metric that you required in the RFP.

With these data points, the carbon intensity (carbon per dollar spent on ICT services), as well as the total estimated carbon footprint, can be calculated. See the hypothetical example in the next section below.  If readers have additional approaches for assessing results, please share with the toolkit team to be added.