Recommended Actions

Action 1.1

From a purchasing perspective, these strategies can be employed in two main areas:

  • Replacing older equipment in their own fleet.
  • Rewarding or assisting contractors that have newer, low emissions equipment.  Public bodies can include terms in contract solicitations establishing preferences for low emission vehicles and equipment to be used on their project.  In these cases, the terms of a contract solicitation can help induce a construction contractor to replace older, heavily polluting vehicles.

Because of the lack of emission control regulations for off-road diesel construction equipment until 1996, diesel engines used in construction equipment are more polluting than those used for on-road applications.  EPA regulations have dramatically improved the emissions of on- and off-road vehicles over the past 20 years. Recently-manufactured off-road diesel-fueled vehicles (compliant with Tier 4 standards) must now be far cleaner than the older vehicles (Tier 1) – 96 percent reductions in particulate matter and nitrogen oxides; 86 percent reductions in hydrocarbons; and 74 percent for carbon monoxide.

Despite these EPA standards and the availability of cleaner vehicles, many fleet operators continue using older, highly polluting diesel-fueled vehicles.  A California study estimated that half of paving equipment will be in use after 24 years after purchase, and half of excavators will be in use after 17 years. Other  have also emphasized the delayed replacement.

Action 1.2

Retrofits

The two common emission-reduction retrofits available for diesel vehicles and equipment are diesel particulate filters (DPFs) and diesel oxidation catalysts (DOCs)

All new engines are certified to comply with EPA emission standards in place at the time of certification. Retrofit technologies are products that may be added to further reduce emissions from certified engine configurations. . DPFs remove up to 95% of particulate matter, including black carbon, from the exhaust gas produced in the combustion of diesel fuel. These work best on engines built after 1995 and require the use of ultra-low sulfur diesel (ULSD). DOCs are a flow-through honeycomb device treated with a precious metal catalyst, like the catalytic convertor on a car that reduces hydrocarbon emissions by up to 70%. DOCs also reduce fine particulate emissions between 20 to 40%. However, they do not remove black carbon, the climate-forcing component of diesel particulate matter. Although the climate benefits of DPFs are far superior, DOCs are less expensive, require little to no maintenance, and have a more universal fit and are therefore used more frequently.

The first is of a diesel particulate filter installed on a reach stacker, the second picture is of a reach stacker itself.

Below is a list of diesel retrofit technologies, typical emissions reductions, and costs from EPA. For more information, go here.

For a detailed matrix that includes specific retrofits and the best practices and alternatives related to those retrofits as well as information on the environmental, social and economic impacts of different retrofit technologies, go here.

The Illinois Department of Transportation (IDOT) purchasing policy for construction contracts requires retrofits for diesel-fueled equipment (Tier 1 and earlier) to reduce emissions – “The reduction of emissions of particulate matter (PM) for off-road equipment shall be accomplished by installing retrofit emission control devices. The retrofit emission control devices shall achieve a minimum PM emission reduction of 50 percent.”

Action 1.3

Maintenance

Proper maintenance consists of regular tune-ups of vehicles and equipment and checking and replacement of worn or damaged parts.  Daily maintenance is also a priority, such as a truck walk-around and greasing of equipment prior to the shift start and prior to starting the diesel motor.   Daily maintenance is also a priority, such as a truck walk-around and greasing of equipment prior to the shift start and prior to starting the diesel motor.

Fuel use can be reduced and worker comfort, safety and productivity improved with regular maintenance of excavators, loaders, pavers, rollers, haul trucks and other vehicles and equipment.

Preventative Maintenance Best Management Practices

  • Replace air and fuel filters regularly (more frequently in dusty construction settings)
  • Inspect air hoses and clamps for leaks, cracks, and chafing damage
  • Consider switching to synthetic lubricants
  •  Measure tire pressure at least once per week
  • Check axle alignment regularly and adjust as needed
  • Monitor fuel quality