Approaches for measuring and tracking GHG reductions in the supply chain and results from puchasing changes.

Asphalt

City of Eugene

Country Involved
United States

Working with the Asphalt Pavement Association of Oregon (APAO) and resources at the Texas Department of Transportation, the City of Eugene developed a special specification for use of warm mix asphalt concrete (WMAC) on City projects in 2008. In order to test WMAC on a City project, the City worked with a local asphalt concrete producer, Eugene Sand and Gravel, to place approximately 8,000 tons of WMAC on an existing multi-year paving project on Roosevelt Blvd. This would be the largest WMAC project in Oregon at the time. Eugene Sand and Gravel retrofitted their asphalt plant to produce WMAC using a plant foaming process, which foams the asphalt oil through an injection of steam as it is mixed with the aggregate to create asphalt concrete. This process reduces mix temperatures by approximately 50 degrees Fahrenheit. The City worked closely with Eugene Sand and Gravel, and Lane County testing staff who provided mix design review and field testing to assure that the WMAC product was successful. The required compaction densities were easily achieved.

The foaming process increases the volume of the binder in the mix which results in better coating of the aggregate in the mix. Eugene found that this better coated material acted as if there was more asphalt cement in the mix and was easier to compact than conventional hot mix asphalt pavement. Compaction is a primary factor in the longevity of asphalt pavements, so ensuring better compaction would also ensure a longer life. Preliminary measurements by Eugene Sand and Gravel showed energy savings of approximately 15% during WMAC production.

After the success of the pilot project, the City chose to require the use of WMAC on six pavement preservation projects under two separate contracts, amounting to an additional 20,000 tons of WMAC to be produced. In addition to this, the City allowed the use of WMAC on other paving projects in 2009 at the option of the Contractor. The use of WMAC in Eugene has generated interest across the state for use of this technology and has given municipalities as well as asphalt concrete production and paving companies an example of how this product can be successfully implemented in Oregon. The City has provided specifications and related construction experiences to multiple jurisdictions interested in using WMAC in Oregon including Federal Highways, ODOT, City of Roseburg, City of McMinnville, Douglas County, and Washington County. Between 2009 and 2014, the City of Eugene specified the placement of approximately 361,000 tons of WMAC, reducing greenhouse gas emissions by approximately 8,700 Metric Tons CO2e. The use of WMAC in Eugene is now the standard practice for all City paving projects.

Even though the use of WMAC can allow longer hauling distances, Eugene specifies a haul distance limitation to ensure that the GHG benefits realized during material production are not negated by the longer travel distances.

The use of reclaimed asphalt pavement, or “RAP”, has been used for more than 30 years in Eugene. For many years, it has been standard practice to specify up to 30% RAP in asphalt pavements. Using typical materials properties, the 30% by weight RAP content replaces approximately 25 – 30% of the virgin binder content of a typical asphalt pavement.

In 2013, Eugene began to move beyond 30% RAP content by increasing the overall asphalt binder replacement in the pavement on a test project. After reviewing materials from various agencies studying this concept, staff met with the three asphalt pavement producers in the Eugene area to discuss the possibilities and plant capabilities. Because each producer had different plant capabilities, the City decided to revise the percentage of RAP content specification to call for 35% binder replacement with reclaimed asphalt materials. A benefit to using a specification based on binder replacement is that the mix design is based on the asphalt content of the specific reclaimed materials rather than industry averages that may not be accurate for the specific stockpile.

The contractors were allowed to use a combination of reclaimed shingles or reclaimed asphalt pavement to meet this 35% binder replacement requirement, up to 5% shingles. Adjustments were made to the grade of virgin asphalt cement used to compensate for the stiffer mix, a result of higher RAP content. Not only did this mix design decrease the use of virgin asphalt binder and increase the use of reclaimed materials in the pavement mix, but there is a potential cost savings to the City. In 2013, two streets were repaved using increased reclaimed binder content asphalt pavement.

Based on positive test results from the 2013 projects, in 2014 and 2015, Eugene continued the practice of using the increased the reclaimed binder in asphalt pavements, using the 35% binder replacement mixes on nearly a dozen streets. With over 13,700 tons of RAP used on 2014 projects, the City reduced the need for nearly 800 tons of asphalt cement and 12,900 tons of aggregate to be mined, refined, processed and subsequently shipped to the pavement producers. In 2016, the City will let a project with 40% reclaimed asphalt materials.

Selection of mix design properties is critical for any asphalt pavement material. Considerations include the environmental conditions, traffic loading and local materials that go into the mix design. For example, while RAP may be more resistant to rutting due to a stiffer mix, many local agency roadways do not experience traffic loading such that rutting is a concern. Instead, local agency roadways are typically more susceptible to cracking and a stiffer mix will increase this susceptibility. Eugene balanced this stiffer material by working with APAO to select an asphalt cement grade that would compensate for this characteristic.

Concrete

Bridge Williamette River Bridge

Country Involved
United States

The Oregon Department of Transportation, working with Knife River Corporation, Hamilton Construction, Slayden Construction, and OBEC Engineering, won a national award from the national Slag Cement Association in the High Performance category for the new Interstate-5 bridge over the Willamette River in Springfield, Oregon. Recognized alongside the new One World Trade Center tower in New York City, which tied for the award, the new bridge used a 60% slag concrete mix, previously never used by ODOT. This slag concrete is strong, with a compressive strength of 6,200 psi, much greater than the required strength of 4,500 psi requested in project specifications. Knife River Corporation provided 35,000 cubic yards of the slag concrete in the form of 12 different mix designs.

CFPT, Food

Arizona State University

Country Involved
United States

Bon Appetit and Intel Corporation’s Cafés

Country Involved
United States

Two of Bon Appetit Management Company’s cafés on the Intel Corporation’s campus in Hillsboro, Oregon utilize several best management practices to repurpose surplus food items. One technique their chefs employ is using vegetable scraps to create stocks for soups and sauces. Another is making chowder out of dairy items prepped for the coffee station that were not used. Utilizing these and other food waste reduction strategies, Bon Appetit reduced pre-consumer waste in these two cafés by 47% and avoided about 100 metric tons of CO2e

Bon Appetit Management Company’s Low Carbon Diet

Country Involved
United States

 Among other “low carbon” strategies like cutting purchases of tropical fruit in half, Bon Appetit’s Low Carbon Diet reduced purchases of beef by 33% and cheese by 10%. Additionally, Bon Appetit reduced food waste by about one-third. Through these combined efforts, the company has decreased its GHG emissions by about 5 million pounds each month

Crieff Hydro in the UK

Country Involved
United States

Crieff Hydro, a hotel in Scotland, reduced its cost by 43% and food waste weight by 31% through a number of strategies including tracking food waste, small batch preparation, and portion control.

Dari Mart, Oregon

Dari Mart stores and their main food provider, Lochmead Farms, provide examples of carbon reducing practices that include energy efficiency at both the agricultural and retail level.  The Dari Mart stores have installed solar panels, replaced door seals on coolers to save energy, reduced transport miles, and are switching to LED lighting. The Lochmead farms are using methane to produce energy; manure and waste straw to produce compost; and are sourcing locally (sometimes from the farms themselves) to provide the ingredients for products like ice cream. These strategies could be applicable to food preparation facilities as well.

Food Recovery Network

Country Involved
United States

Since 2011, the Food Recovery Network has been partnering with colleges and universities to promote food rescue. The Network has chapters at over 113 colleges and universities in 30 states and Washington, DC that recover edible surplus food from on-campus dining halls and other eateries. Since September 2011, Food Recovery Network has recovered over 600,000 pounds (300 tons) of food and donated it to people in need

Fork it Over in the Portland Public School System

Country Involved
United States

 In 2004, the Portland Metro government launched Fork it Over!  Portland State University’s Community Environmental Services now runs this program. The program’s goals are to reduce the generation of commercial food waste through waste prevention and to strengthen the food donation infrastructure by recruiting targeted businesses and public institutions to commit to donating food regularly.

As one example of a Fork it Over! success story, the Portland Public School System worked with non-profits near the schools to coordinate quarterly food collection before long school holidays. Over ten years, about 92 tons of less perishable foods like fruit, bread, juice, and breakfast bars have been donated.

LeanPath and Gundersen Health Systems

Country Involved
United States